Important notes
Additional safety notes for devices with
wireless components
Wireless componentsWireless LANBluetooth,Safetynotes
If a wireless component (Wireless L AN, Bluetooth, 4G) is integrated in your Tablet PC, you must
be sure to observe the following safety precautions when using your Tablet PC:
• Switch off the wire less components when you are in an aircraft or driving in a car.
• Switch off the wireless components when you are in a hosp ital, a n operat ing
room or near a me dical electronics system. The transmitted radio waves
can impair the operation of medical d evices.
• Switch off the wire less co m ponents, when you let the device get ne ar flammable
gases or into hazardous environments (e.g. gas station, paint stores), as the
transmitted r adio waves can cause an explosion or a fire.
For further information on how to switch the wireless components on and off, refer
to section "
Switch ing the wireless co mpon ents on and off", Page 40.
Protecting the display screen
Do not pour liquid
s on the system or wash it with a heavily soaked cloth. Do not place
itemsonthetopo
f the m onitor in order to prevent it from being damaged.
During normal u
se of the device, small particles from the environment
can become embe
dded in the stylus tip and scratch the screen. The
warranty doe s
not cover a scratched screen.
Energy savin
g
NotesEnergyPowersavin
g
If you will not be using your Tablet PC, switch it off. Switch off any connected external devices whe n
they are not in use. If you use the energy-saving functions, the Tablet PC uses less power. If you do
this, you will be able to work longer with the Tablet PC before having to recharge the battery.
The energy e fficiency is increased and en vironmental pollution is reduced.
You s ave money and help protect the environment.
Energy saving under Windows
► Make use of the available energy-saving functions as described in chapter
"
Using the energy saving functions", Page 37.
Fujitsu 17
To Next Page
Loading...
Need help?
General
Weight and Dimensions
