Fujitsu STYLISTIC Q736

Connecting external devices
HDMI port (o nly with docking cradle, keyb oard docking
station and power keyboard doc
king station)
HDMIport
The HDMI port can be use d to connect an external a mplifi er, LCD TV or a
plasma TV with an HDMI conn ection.
► Connect the data cable to the
external device.
► Connect the data cable to t
he HDMI port.
Some LCD televisions have only two speakers/speaker ports and therefore
cannot reproduce Dolby Digital or DTS. To play back HDMI sound, you
must change the HDMI sound settings accordingly.
You can find the settings under Control Panel - Hardware and Sound. Deactivate the
settings for DTS Audio and Dolby Digital to enable playback of HDMI sound.
External monitor port (VGA) (only cradle, keyboard docking
station and power keyboard docking station)
An ana log monitor is connected to the analog VGA mo nitor port. Screen output is
limited to a maximum of two screens at the same time.
MonitorVGAportScreenconn ectionMonito r connection
► Switch off the Tablet PC and the
external monitor.
► Plug the data cable of the external
monitor into the monitor port.
► First switch on the external monitor and
then switch on the Tablet PC.
You can also switch back and forth betwee n the external monitor and the LCD
screen of the Tablet PC, see "
Touchscreen", Page 28.
You can display the same image on the external monitor and on the LCD
screen of the Tablet PC at the same time.
80 Fujitsu