Working with the Tab let PC
Using fingers
You can execute certain commands by using your finger tip on the touchscreen of your device.
Alternatively, everything which you can select or activate using your finger
tip can also be selected or activated using the stylus.
Calibrate the Dual Digitizer for finger-based
operation of the device
.
Before the first finger-base d operation, you must calibrate your Tablet PC via the
operating system, so that it recognizes your fingertips as accurately as possible.
As soon as you notice that the accuracy is beco ming worse, you
must recalibrate the device.
Please note: There are separate calibration p rograms available for calibrating
the stylus and for calibrating finger-based operation. Do not use the calibration
tool for the stylus to calibrate finger-based operation.
Operating system Menu
Windows 7 / Windows
10
To calibrate, run the Hardware and Sound / Tablet PC Settings function in the
Control Panel. You need to calibrate both portrait and landscape formats.
Using the stylus
Pen
1
2
3
1 = stylus tip
2 = stylus button ( right mouse button)
3 = eyelet for optional stylus tether
You can use the stylus on your Tablet PC as an electronic writing tool, to select m e nu items and to
navigate through the programs. Programs that support handwriting recognition also allow you to
write directly on the screen with the stylus. You ca n also use the stylus as a drawing tool.
A stylus te ther is available as an optional extra and you can use this to tie the
eyelet on the stylus to the eyelet on the Tablet PC .
Fujitsu 31
To Next Page
Loading...
