Fujitsu STYLISTIC Q736

Troubleshoot ing and tips
The printer does not print
Printerdoe s notprint
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is sw
itched
on and ready for operation (ref
er to the
documentation s upplied with t
he printer).
The printer is not connected c
orrectly.
► Check that the d ata cable betwee n the Tablet
PC and the printer is properly connected.
The printer driver is fa ulty or not correctly
installed, or it is th e wrong printer driver.
► Check that the d ata cable betwee n the Tablet
PC and the printer is properly connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
The wireless connect
ion to a network does not work
Thewireless conne
ctionto a network doesnotw ork
Cause Troubleshooting
The wireless component is switched off. ► Switch the wireless component on (see
"
Switch ing the wireles s com ponents on and
off", Page 40).
The wireless component is switched on. Despite
this, the wireless connection to a netwo rk does
not w ork.
► Check whether the wireless connection is
enabled by the software.
► Further information o n using the wireless
component can be found in the help files.
The battery di
scharges too quickly
Battery
Cause
Troubleshooting
The battery i
s either too hot or to o cold. In this
case the batt
ery indicator flashes.
► Bring the Tab let PC up/down to a normal
operating temperature again.
► If the operating time of the battery life is
extremely short, the battery is probably t oo
old. Replace the battery if necessary.
You m ay have an application running that
consumes a great deal of power due to frequent
accessing of th e hard disk or optical drive.
► Use the AC adapter whenever possible.
The maximum brightness may have been set
for the screen.
► Reduce the brightness of the screen to
lower energy consumption: You will find the
setting under Control Panel – Hardware and
Sounds – Win d ows Mobility Center.
Fujitsu 91