Working with the Tab let PC
Stylus lo cation
To prevent the stylus from jamming in its slot, always make sure that you insert th e stylus
correctly into its slot ( flat part of the stylus points towards the bottom of the Tablet PC).
On delivery, the stylus (1) is
locatedinthestylus
slot:
1
Adjusting t he stylus
Operating system Menu
Windows 7 Under Hardware and Sound - Pen and Input Devices, you can make various
settings for the stylus in the control panel (assignment and fu nction of
the stylus button).
Windows 10 Under System Control - Hardware and Sound - Pen and Touch you can make
various settings for the stylus.
Calibrating the stylus
Before first
use with the stylus, you must calibrate your Tablet PC via the operating
system, so t
hat it recognizes the stylus as accurately as possible.
You should a
lso always repeat the calibration if the co-ord ination between the
stylus and
the cursor move ment deteriorates.
Operating system Menu
Windows 7 / Windows
10
To calibrate, run the Hardware and Sound / Tablet PC Settings function in the
Control Panel. You need to calibrate both portrait and landscape formats.
Fujitsu 33
To Next Page
Loading...
