First-time setup of your device
Choosealocation
Choosea l ocationSetupAC ada pter
Choose a suitable location for the device before setting it up. In doing
so, please follow these instructions:
• Never place the device or the AC adapter on a heat -sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can result in damage caused b y overheating.
• The back of the device heats up during normal operation. Prolonged contact
with skin can become unp leasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. P lease note that the
rubber feet of the device may mark certain types of delicate surfa ces.
• Keep other objects at least 100 mm / 4 inches away from the device
and its AC adapter to ensure adequate ventilation.
• Do not expose the device to extreme environmental conditions. P rotect
the device against dust, humidity and hea t.
Mounting the feet (only device versions
with palm vein sensor)
FeetFeet
Before initial startup of the above-mentioned device versions, F ujitsu recommends
that you mount the supplied f eet.
► For how to install the feet , see section "
Using t he palm vein sensor (de vice-dependent)", Page 7 1.
Fujitsu 21
To Next Page
Loading...
