Accessories for your Tablet PC (opti
onal)
Connecting the Ta blet PC to the cradle
It is possible to connect the Tablet PC to the cradle while it is running.
Disconnect the AC adapter from the Tablet PC before connecting
the Tablet PC to th e cradle.
When the Tablet PC is connected to the cradle, you must connect the AC adapter
to the cradle, to be able to u se all the cradle’s functions.
Cradle
► Remove the AC plug of the AC ada pter from the power ou tlet.
► Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC.
1
2
4
3
Your cradle is supplied with a separate AC adapter (19 V, 3.42 A). M ake
sure that you only use this AC adapter for the cradle.
► Position the Tablet PC so that it lies against the storage surface of the cradle.
Fujitsu 45
To Next Page
Loading...
