Accessories for your Tablet PC (opti
onal)
► Position t he Intermediary VESA Mount Plate on the Tablet PC (3). Make sure that the screw
holes of the Intermediary VESA Mount Plate and of the Tablet PC lie exactly on top of each o ther.
► Secure the Inte rmediary VESA Mount Plate using the screws (4).
Hand strap ( optional)
For models with screw holes, Smart Card readers or palm vein sensors, an
optional hand strap can be attached to the rear.
The h and strap cannot be used in combination with the Intermediary
VESA Mount Plate or shoulder strap.
The hand strap accessory contains the following components: Hand straps,
two M 2x6 screws, two M2x8 screws and two spacers.
Fujitsu 57
To Next Page
Loading...
