Fujitsu STYLISTIC Q736

Working with the Tablet PC
Inserting the memory card
1
3
2
► Open the slot cove r (1).
► Carefully slide the storage card into
the s lot (2). The label area must be
facing d ownward. Do not apply any
force, otherwise t he delicate contact
surfaces could be damaged.
Memorycard
► Close the slot cover.
Removing the memory card
Memorycard
To avoid any loss of
data, always follow the correct procedure for removing the
card (see the docu
mentation for your operating system).
1
a
3
2
► Open the slot cove r (1).
► Press the edge of the m emory card so
that the memory card jumps (2 ) slightly
out of the slot (a).
► Pull the m emory card out of the slot (a)
in the direction of the arrow (3).
► Close the slot cover.
38 Fujitsu