s Press the appropriate softkeys to configure your de
-
sired time control period.
Daily/MSN-1:
Off
Main time: Off
not active (-)
ON
Remaining: Off
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
s Press the »not active« softkey to view the configured time periods one after the ot
-
her.
s Press the softkey »Main time« to set the announcement that is to be played to callers
within the set time period. Use the »Remaining« softkey to define the announcement
to be played for callers outside of this time period.
If several announcements are available you can display all saved announcements one af
-
ter the other by pressing the »Next announc.«softkey.
For example:»Anncm.-1«, »Anncm.-2«, ...., »Anncm.-9« or »Anncm.-10«.
s Press the »ON« softkey to activate the time-controlled function. The status is switched to
»ON« and the corresponding softkey changes to »OFF«.
Press this softkey to deactivate the weekly profile.
O Confirm your settings with OK to leave the
Time-controlled menu.
Daily/MSN-1:
On
Main time: Anncm.- 1
13:00 to 13:30 (2)
OFF
Remaining: Anncm.- 3
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Configuring »Weekly profile« time control function
As an alternative, you can define a weekly profile as the time-control function for the extension num
-
bers »MSN-1«, »MSN-2« and »MSN-3«. In aweekly profile you canassign different time periods to
each day during which different announcements are played ( main time).
In the time outside of theselected periods ( »Remaining«) you can configure a different announce
-
ment. This announcement is identical for all days defined in the weekly profile. In addition, you can
also assign an operating mode in the weekly profile for the Remaining time that is different than that
for the Main time. For example, you can define that during the Main time messages can be left, while
during the Remaing time it is not possible.
In the menu »Time-controlled« press the softkey »Weekly prof.«.
English
17
To Next Page
Loading...
Need help?
General
