s Press the appropriate softkey to determine main ti
-
mes and remaining times or activate the time con
-
trol feature.
Weekly prof./MSN-1:
Off
Define main times
ON
Define rem. Time
s Press the softkey»Define main times«, to configure the time intervals andthe an
-
nouncements for each day of the week during the so-called main time.
s Press the softkey »Define rem. Time« to configure the announcement and the
mode of operation for the remaing time for each day of the week.
s Press the softkey »ON«, to activate the weekly profile. On the first lines of the display the
status is switched to »=ON« and the corresponding softkey changes to »OFF«.
Press this softkey to deactivate the weekly profile.
When you activate the weekly profile any daily time control that may be active will be
de-activated automatically.
Configuring main times
In the menu »Weekly prof. « press the softkey »Define main times«.
Press the appropriate buttons and softkey to configure the an-
nouncement and set the main time intervals for each day of the
weekly profile. In this example: »Monday«.
Define
main times: Monday
not active (-)
not active (-)
Ans. mach. inactive
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
s Press the softkey »Ans. mach. inactive« to set the announcement that is to be
played to callers within the set time period.
If several announcements are available you can display all saved announcements one af
-
ter the other by pressing the »Next announc.«softkey.
For example:»Anncm.-1«, »Anncm.-2«, ...., »Anncm.-9« or »Anncm.-10«.
s Press the »not active« softkey to view the configured time periods one after the ot
-
her. For example: »Time 1«, »Time 2«, …, »Time 9«.
You can define two time intervals, during which a caller hears the announcement you
have determined.
To make settings for other days of the week, press the arrow buttons.
English
18
To Next Page
Loading...
Need help?
General
