Funkwerk elmeg CS410 User Manual

Code numbers for remote polling
After successfully initiatingremote polling,you can use the individual functions by entering the follo
-
wing codes.
Toterminate remote polling,hangupthehandset of the telephone afterenteringthe required code.
All indented codes can beused while listening to texts only (messages, announcements,
info texts).
General code numbers
*00q Switchoff answering machine
*02q Queryforavailablestorage capacity
Available storage capacities for leaving messages are identified by acoustic
signals.Eachacousticsignalstandsforathree minute storage capacity.
Listening to or deleting messages, listening to information texts
10q Listentonewmessage
11q Listentooldmessage
12q Listentoactivatedinformationtext
#q Listentonextmessage
*q Listentoprevious message
0q Endplay-backofcurrentmessage
2q Deletingofthelastmessagethat was listened to
22q Deletingofallmessagesthathave been listened to
Listening to or deleting announcements or recording new announcements
You can terminate the playback or recording of an announcement by pressing »0«. If you press »2«
during an ongoing playback / recording, the announcement will be deleted.
If you delete an announcement that has already been assigned to an extension number (MSN), then
all settings associated with this number (forexample mode of operation,call signal duration,message
length and time control function) will also be deleted.
English
26

Funkwerk elmeg CS410 Specifications

General

Brand	Funkwerk
Model	elmeg CS410
Category	Telephone
Language	English