If the other telephone is a system telephone (for example CS300) the status of the answering machine
can be indicated by pressing the function key »Line AM«. When you press this key you can accept a
call, or establish a connection to the answering machine (for listening to messages for example). Ac
-
cepting of calls is only possible from Version 6 of the PABX system.
In addition, youcan also operate the answering machine for »MSN-10« from aremote location as fol
-
lows:
Initiating remote polling (answering machine switched on)
bt g #t#q
Dial number
(MSN-1)
Voice announcement of
the answering machine
Enter PIN 1
Attention: You have to press »# PIN #« during the on-going announcement. After successfully in
-
itiating remote polling (positive acknowledgement signal), you can use the individual functions by
entering the following code.
Toterminate remote polling,hangupthehandset of the telephone afterenteringthe required code.
All indented codes can beused while listening to texts only (messages, announcements,
info texts).
Listening to or deleting messages, listening to info-texts
10q Listentonewmessage
11q Listentooldmessage
#q Listentonextmessage
*q Listentoprevious message
0q Endplay-backofcurrentmessage
2q Deletingofthelastmessagethat was listened to
English
30
To Next Page
Loading...
Need help?
General
