9. Raster Chart Material
9-13
If ARCS format is active, you can choose ARCS License from the Chart menu, with “Licence”. License information
is shown in the window. This window contains information about owner of license, user permit and type of license.
License information window
9.4.4 Getting started with ARCS charts
In order to get charts in the system and display them you have to do the following:
1. Load permit from the floppy disk by using Chart Permits in the Chart menu. For further details, see paragraph
9.4.5 “Loading chart permits for ARCS Navigator license”.
2. Load chart from ARCS CD ROMs. For how to load chart, see paragraph 9.4.8 “Loading a new ARCS chart into
the system“.
3. Load update from a Weekly CD ROM. For how to update chart, see paragraph 9.4.9 “Updating ARCS chart“.
4. Open desired chart from the Chart menu by using the Open Chart or Chart Catalogue command.
If new Update CD ROM arrives, continue from step 3.
If you order more charts, continue from step 1.
To Next Page
Loading...
