23. Recording Functions
23-11
23.3.7 Resetting (emptying) voyage and danger targets logs
It may be useful to reset (empty) the voyage and danger targets logs when you are starting a new voyage. If
necessary, make a backup copy before resetting. To reset a log, do the following:
1. Spin the thumbwheel to show Menu/Info/Chart Menu in the mouse
functions area and then push the left mouse button.
2. Choose Record from the menu and then push the thumbwheel.
3. Choose Reset from the menu and then push the thumbwheel.
4. Choose the log to reset from the menu and then push the thumbwheel.
5. The system will ask you if you are sure to reset chosen log. Click the OK
button to reset the chosen log.
23.3.8 Making a user chart from a log (past track)
You may create a user chart from any log among details, voyage and danger target. The past track of the Danger
Log target is useful for making a use chart from a single target.
1. Spin the thumbwheel to show Menu/Info/Chart Menu in the mouse functions area and then push the left mouse
button. Choose Record from the menu and then push the thumbwheel.
2. Choose the log (Details, Voyage, Danger Target) from which you want to make a user chart and then push the
thumbwheel.
3. Click the OK button to continue.
4. Choose the log entries which you want to use to create a user chart.
First 1000 Prev 1000 Last 978
5. Click the triangle and select “Save as User Chart” to show log.
To Next Page
Loading...
