11. Chart Alarms
11-5
11.2.3 Highlighting chart alarms
The user can choose the level of transparency of the chart alarm highlight. Follow the procedure below to choose the
level of transparency.
1. Spin the thumbwheel to show
Chart Display/Info/Standard
Display and then push the left
mouse button.
2. Click the right or left arrow tab
to choose the Mariner page, as
shown right.
3. In the User chart box, place the
cursor in the combo box, spin the
thumbwheel to choose level of
transparency desired and then
push the thumbwheel.
4. In the Chart Alarm box, choose
Std or Other position to enable
highlighting of alarm area.
To Next Page
Loading...
