Furuno FEA-2107 - Calling Menus and Functions by the Mouse Buttons

4. Control Units
4-10
4.4.4 Calling menus and functions by the mouse buttons
The mouse buttons can be used to call menus or functions on the display. At the lower right corner of the display the
mouse functions area displays available function or menu name, as shown in the figure below. Spin the thumbwheel
to choose menu or function desired, and then push the left button, thumbwheel or right button as appropriate to
access the menu or function desired. Available menus and functions depend on cursor location. (For more
information, see paragraph 3.3 “User Interface”.)
F1
F2
F3
F4
Left Button
Right Button
Thumbwheel
Mouse functions area
LEFT BUTTON
THUMBWHEEL RIGHT BUTTON
Menu Info Chart Menu
Range- Info Range+
TM Reset Info ShipOffcenter
Event Info MOB
Set Chart Center Info Activate Scroll
Show Value Info Nav Marks
Chart Display Info Standard Display
Using the functions shown in the figure above as an example, the available functions with the mouse are as follows:
• “Menu” by pushing left button
• “Info” by pushing thumbwheel
• “Chart Menu” by pushing right button