Furuno FEA-2107 - 19.10.1 Installation Parameter for Wind Sensor

19. Navigation Sensors
19-24
True wind or Relative wind may be selected from the Other dialog box in the Sensors menu.
Relative wind/true wind
selection box
19.10.1 Installation parameter for wind sensor
There are installation parameters for a wind sensor:
• Source of True wind (Setting for inputted serial data)
• Display format (Relative wind, true wind)
• Output format to ARPA (output format to ARPA)
The tables which follow describe the above-mentioned parameters. Greyed options are default settings.
Source of true wind
Option Description
Receive (R)elative/Apparent Wind and Calculate True
Wind
“R” is extracted from the MWV sentence, read as
Apparent data and North and Theoretical are calculated.
Receive (T)heoretical Wind(HDG) and Calculate True
Wind
“T” is extracted from the MWV sentence, read as
Theoretical data and North and Apparent are calculated.
Receiver (T)rue Wind(North) and use it directly “T” is extracted from the MWV sentence, read as North
data and Apparent and Theoretical are calculated.
Display format
Option in Sensor dialog box Option
Rel wind True wind
Display Rel(=Theoretical) or True(=North) Theoretical North
Display Rel(=Apparent) or True(=North) Apparent North
Display Rel(=Apparent) or True(=Theoretical) Apparent Theoretical