Furuno FEA-2107 - Removing ARCS Charts from the System

9. Raster Chart Material
9-30
Choosing active group
You can make a group an active group as follows:
1. Open the Chart menu. Choose Chart Catalogue from the menu.
2. Click Groups in the View Filters window.
3. Choose desired group from the Edit Group list box.
Removing a group
You can remove a group from the hard disk as follows:
1. Open the Chart menu. Choose Chart Catalogue from the menu.
2. Choose desired group from the Edit Group list box.
3. Click the Edit Group button followed by clicking the Remove button. Click the Ok button to confirm.
9.4.14 Removing ARCS charts from the system
You can remove ARCS charts from the system, manually or by active group.
Manually removing an ARCS chart
[Remove Charts]
By Group
Manual
Go Back
1. Open the Chart menu.
2. On the menu, check if the menu item Activate S57 chart appears on the first
line. If it is displayed, go to step 4.
3. If the menu item Activate ARCS chart is displayed, push the thumbwheel.
4. Choose Remove Chart from the menu and Manual from the sub menu.
Then, the Chart Operations window appears.
5. Choose desired charts to remove them from the system.
6. Click the Remove Chart button to remove chosen charts from the hard
disk.