Furuno FEA-2107 - 5 Standby Mode; Switching Standby Mode on and off

5-1
5. Standby Mode
5.1 Switching Standby Mode ON and OFF
The standby mode deactivates the audible alarms from the ECDIS. Use it while in harbour or other similar situation
where use of the ECDIS is not required. To switch the Standby mode ON, do the following:
1. Spin the thumbwheel to show Menu/Info/Chart Menu in the mouse functions area
and then push the left mouse button.
2. Spin the thumbwheel to choose Initial Settings and then push the thumbwheel.
3. Place the cursor on the triangle inside the Initial Settings dialog box, and the
menu shown left appears.
4. Choose Standby and then push the thumbwheel.
5. The following window appears at the top of the ECDIS display to indicate that
audible alarms are switched off.
To switch Standby mode OFF, that is, return to normal operation, choose “BACK TO
NORMAL MODE” with the cursor and then push the left mouse button.
.