27. Conning Display
27-5
27.2.7 Trackpilot window
The trackpilot window displays the following information:
• SET R.O.T.: Current set rate of turn based on current speed and set turning
radius.
• SET COURSE: Current set course.
• MODE: Indicates chosen steering mode.
• PLAN SPEED: Planned speed in current leg of the monitored route.
• ACKN WARNING: Steering-related alarms displayed in lower status bar
of ECDIS are also displayed on the conning display.
This is called the trackpilot extended window, where the following additional
information is available:
• SET RADIUS: Indicates chosen radius for turn.
• PROG CRS: Course after turn designed by program course change or
program track steering mode.
• SET HDG: Calculated heading for ship based on SET COURSE and
DRIFT. This information is available when the program track steering is in
use.
Trackpilot order window for DNV specification
SET COURSE xxx.x deg
SET RADIUS x.x nm
SET R.O.T. xxx.x deg/min
SET SPEED xx.x kt
MODE (steering mode)
ACKN. WARNING (steering related warning)
To Next Page
Loading...
