6. Setup Before Departure
6-4
6.7 Checking and Preparing Route to Monitor
Choose a route for the next voyage: Choose Route on the status bar and then click the Monitor button. For more
information about route selection, see paragraph 14.2 “Choosing Route to Monitor”.
If the text “Checked conditions are different” appears in the dialog box, this means that
conditions chosen during route planning were different than those chosen for use during route
monitoring. For further details on how to use checked conditions, see paragraph 6.7.3 “Using
checked conditions of the route plan” and paragraph 6.7.4 “Using planned user chart”.
To Next Page
Loading...
