EasyManua.ls Logo

Furuno FEA-2107 - Hand Steering; Trackpilot Steering; Waypoint Mode; Track Mode

Furuno FEA-2107
664 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28. Trackpilot
28-2
28.2.1 Hand steering
Manual steering modes are:
Steering wheel
Wing steering control
Override tiller
While in a manual steering mode, the ECDIS system is displaying the rudder angle and indication of hand steering
mode.
28.2.2 Trackpilot steering
Operator sets the required heading of the ship.
Turning radius is also set by operator (or in Heading Control mode the rudder angle limit).
Turn is initiated by operator.
The ECDIS displays required heading, radius, rate of turn and predicted turn. (Curved EBL can also be displayed,
but not in Heading Control mode.)
28.2.3 Waypoint mode
The ECDIS system will follow the planned track to a next waypoint but with moderate accuracy in order to have
more economical sailing (sailing in ocean areas).
When approaching a next waypoint, the ECDIS alerts the operator both well before the turn and just before the turn.
The ECDIS system performs turns using planned radius.
28.2.4 Track mode
In the track mode, the planned track is followed at the maximum accuracy between waypoints and also in the turn
(position-controlled turn).
Like at the approach to a waypoint, the ECDIS alerts the operator both well before the turn and just before the turn
when approaching a waypoint.

Table of Contents

Related product manuals