EasyManua.ls Logo

Furuno FEA-2107 - Rudder Window; Position Window; Drift and Radius Window

Furuno FEA-2107
664 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27. Conning Display
27-4
27.2.4 Rudder window
The rudder window shows the following information:
First rudder and source of the first rudder. In this example the source is actual
rudder (ACT).
Second rudder and source of the second rudder. In this example the source is
ordered rudder (ORD).
In this example only one rudder is connected.
Double rudder window for actual and order rudder.
Note when using this window, size of Speed window will be smaller.
This the “small size speed window with dual speed indications. Small size with
dual speed indication also available.
Double rudder window for actual and order rudder in smaller window.
Numerical value for ordered rudder position available.
27.2.5 Position window
The position window shows the following information:
LAT and LON of own ship position
Source of own ship position. See the chapter on navigation sensors.
Datum of own ship position. See the chapter “Datum”.
Local date and time. Current date and time used in the ECDIS.
27.2.6 Drift and radius window
The drift and radius window shows the following information:
SET RADIUS: Current set radius on Trackpilot.
ACT RADIUS: Current radius of turn.
HDG: Current heading
DRIFT: Direction and angle of drift.
COG: Course Over Ground and source of it.

Table of Contents

Related product manuals