9. Raster Chart Material
9-21
Loading updates by active group
Loading updates by active group is used when you want to update only ARCS charts which you have designed to
include in a defined group. This is very useful if your license includes a lot of charts from around the world and you
are going to use only a part of charts for which you have a permit. Define a group from charts you need for voyage
and update them into the system. To update by active group, proceed as follows:
1. Define a group, if one does not exist. For more information, see paragraph 9.4.13 “Grouping ARCS charts”.
2. Set group as an Active group. To set group as Active group, see “Choosing active group“ on page 9-30.
[Update Charts]
By Permits
By Group
Manual
Go Back
3. Open the Chart menu, choose Update Charts from the menu and By Group
from the sub menu.
4. An ARCS Update window appears and it shows active group.
5. Insert Update CD ROM in the CD ROM drive and then click the Load
button.
To Next Page
Loading...
