Furuno FEA-2107 - Page 74

8. Vector Chart Material
8-8
5. In the Load or Update Charts from loaded CD ROM dialog box (see page 8-10), you choose the charts to load
into the ECDIS. Then, click the Load button to load charts into the ECDIS. See also “Interpretation of Load or
Update Charts from loaded CD ROM dialog box” on page 8-10.
North Up TM
ECDIS only
HDG 070.0°
SPD
(CALC)
1.8 Kt
SB
(POSN)
1.7 Kt
COG
(POSN)
045.1°
SOG
(POSN)
2.0 Kt
6. Before loading starts (and then automatically converts them into SENC format) you are asked confirmation for
this operation.