Furuno FMD-3100 - Page 67

1. INITIAL SETTINGS AND ADJUSTMENTS
1-61
• Thruster
[Title]: Enter the title of the component.
[Label]: Enter the data name.
[Actual Source]: Select the data source of the actual thruster generating power.
[Rated Source]: Select the data source of the rated thruster generating power.
• Track Order
[Title]: Enter the title of the component.
• Watch Alarm
[Title]: Enter the title of the component.
[Backup Source]: Select the data source of the backup officer name.
[Stage Source (ALR)]: Select the Stage Source (ALR).
[Stage Source (wtr)]: Select the Stage Source (wtr).
[Maximum Time Source]: Select the data source of the watch time setting.
[Remaining Time Source]: Select the data source of the remaining time.
• [Watch Alarm (Multi)]
[Title]: Enter the title of the component.
[Backup Source]: Cannot be changed. Set automatically.
[Stage Source (ALR)]: Select the Stage Source (ALR).
[Stage Source (wtr)]: Select the Stage Source (wtr).
[Maximum Time Source]: Select the Maximum Time Source.
[Remaining Time Source]: Select the Remaining Time Source.
Track Order
021.8°
1.0 NM
001.0 °/min
GoSEA Appr. Enabled