30
7 Software Information (AKA Working with Simplify3D)
A large part of getting great results from your printer is good setup on the software (Simplify3D) side. A
comprehensive manual on Simplify3D would be a book by itself, so our goal here is to:
Provide a general overview of the software and workflows
Cover some of the more common issues with prints and how to fix them in Simplify.
This is not intended to be comprehensive. If you have additional questions please contact us!
Simplify3D is written, maintained, and sold by www.simplify3d.com; it is not a product of Fusion3. We
bundle Simplify3D with our printers and provide tier 1 technical support for this software.
7.1 Additional Resources
Simplify3D has some additional resources that may be helpful. Please remember that not all of
Simplify’s documentation apply to your printer, since we do some things a little differently. When in
doubt please follow our instructions vs. Simplify’s.
https://www.simplify3d.com/support/video-library/
https://www.simplify3d.com/support/tutorials/
https://www.simplify3d.com/wp-content/uploads/2015/06/S3D-Quick-Start-Guide-v3.pdf
7.2 Basic Interface & Operations
Recommended links:
https://www.youtube.com/watch?v=HIhpUfCorSM
https://www.youtube.com/watch?v=i5rLVYpeoXU
https://www.simplify3d.com/support/tutorials/importing-and-manipulating-your-models/
The Simplify3D Main Interface:
To Next Page
Loading...
