FUTABA 9ZAP - PART1 User Manual

Model Setting Section
RST—DATA RESET
This function is designed to allow you to reset
selected portions — or all — of the settings saved in
the active memory. You may individually choose
to reset the following sets of data:
REV & F/S. . . .Resets all reversing and failsafe
data
AFR & D/R . . .Clears all AFR and Dual Rate
information
TRIM ...... .Resets the trims stored
ATV
....... .Initializes all throw volume in-
formation
PMIX ...... .Clears all programmable mixers
SMIX ...... .Resets all special mixing func-
tions EXCEPT ATV, AFR,
D/R,PMX,CNA,TRM
COND. ..... .Clears all condition menu items
except CNA
ALL ....... .Resets all functions except for
CSL, PMD, and MNA (also
resets CSL switch settings)
Data Resetting Procedure
In the Model Menu, press the RST key to get the
reset menu.
Selection the function to be reset using the A toD
and O to R (right and left arrow) keys.
To reset the active condition only, press the SGL
(Single) key. To reset all conditions, press the GRP
(Group) key. If you only went to reset REV+F/S or ALL,
skip these buttons and continue.
If you are happy with your choices, choose the YES
(I) key. If you'd like to make corrections, press the
NO (J) key.
If you would like to reset other items, repeat this
procedure. When complete, use the END ( N ) key to
exit.
Model Setting Section, Page 46

FUTABA 9ZAP - PART1 Specifications

General

Brand	FUTABA
Model	9ZAP - PART1
Category	Remote Control
Language	English