Model Setting Section
RDR—ROTOR DIRECTION
This function is used to tell your PCM 1024Z properly set the mixing directions. The rotation
system the rotor rotational direction, so it can direction, when viewed from the top, is entered.
Rotor Direction Setting Procedure
In the Model Menu, press the RDR key to get the
Rotor Direction Setting menu.
Return to Model
Menu
Select Rotation Direction Keys
Use the CW
(F
)
key
to
select
the
clockwise
(as
viewed from above) rotation direction, and use the CCW
(
G)
key to select the counter-clockwise direction. The
chosen direction appears in the display box.
End setting by pressing the END (N) key.
Model Setting Section, Page 56
To Next Page
Loading...
