156
<Data>
5HVHW
Linear curve adjustment
Rate A and Rate B can be adjusted separately or
simultaneously.
*[Separate] mode:
separately.
*[Combined] mode:
simultaneously.
1. Select the setting mode.
*Initial value: +100.0%
The curve can also be offset horizontally in the
vertical direction and the rate reference point can
be offset to the left or right.
*Initial value: +0.0%
move the reference point to the
left or right.
*Initial value: +0.0%
Setting by curve type
When the curve type is selected as described above, adjustment buttons corresponding to the curve type
appear on the original screen. Adjust each curve as described below.
(Linear curve)
To Next Page
Loading...
Need help?
General
