FUTABA T18SZ - Page 66

66
＜ Systemmenu ＞
fixandreturntoan
informationscreen.
Movementofacursorofaninputbox
Inputbox
The program version, and SD card si]e are displayed. The User name,
language and Unit system used by the system can also be changed.
The Information screen displays the T18SZ
system program version information, SD card
(memory size, card free size) information.
*If an SD card is not inserted, no memory card information
will be displayed.
ŏ Tap the [Information] button at the System menu
to call the setup screen shown below.
ŏReturn to System menu
Information
Telemetry numerical values can be displayed in
either metric or SAE (yard-pound) units.
This function registers the T18SZ user name
and the language displayed at proportional can be
changed.
ŵƈƊƌƖƗƕƄƗƌƒƑŃƒƉŃƗƋƈŃƘƖƈƕŊƖŃƑƄƐƈ
T18SZ transmitter can register user's name.
How to register user's name
1. Turn on the power of the transmitter.
2. Select "user's name" and then the keyboard
will pop up.
3. You can use up to 15 characters as a user's
name. Use the keyboard on the screen to
enter user's name.
Backspace(Inputbox)
Nextpage
(Characterlist2/4-4/4)
Aninputboxisreset
Thelanguagedisplayedatproportionalcan
bechanged.TheinitialsettingisEnglish,but
8differentlanguagescanbeselected.
[Metric]
Distance---m(meter)
Speed---km/h(kilometersper
hour)
Variometer---m/s(meterper
second)
Temperature---℃(centigrade)
[Yard]
Distance---yard
Altitude---feet
Speed---mph(mileperhour)
Variometer---fpm(ftpermin)
Temperature---F(fahrenheit)
TelemetryDisplayUnit