FUTABA T18SZ - Telemetry: Servo Sensor [Temperature] [Angle]

110
＜ Linkagemenu ＞
Asetupoftheangle
onwhichthealarm
operates.
Alarmischosenfrom
Buzzer,Voice,and
Inhibit.
Alarmischosenfrom
Buzzer,Voice,and
Inhibit.
TheON/OFFswitch
ofSpeechischosen.
TheON/OFFswitch
ofSpeechischosen.
Vibratorischosenfrom
type1-3,andInhibit.
Vibratorischosenfrom
type1-3,andInhibit.
↑Anupwardarrow
indicatesthealarm
willsoundwhenthe
temperaturereaches
aboveyoursetvalue.
↑Anupwardarrow
indicatesthealarm
willsoundwhenthe
anglereachesabove
yoursetvalue.
↓Adownwardarrow
indicatesthealarm
willsoundwhenthe
temperaturereaches
belowyoursetvalue.
↓Adownwardarrow
indicatesthealarm
willsoundwhenthe
anglereachesbelow
yoursetvalue.
Initialvalue:↑ +180.0°↓ -180.0°
Adjustmentrange-180.0° ~+180.0°
( ↑ Limit≧↓ Limit)
Telemetry:Servosensor[Temperature][Angle]
*Servosensormustbeinstalledintheaircraft.
ŏ Select [Servo sensor] in the Telemetry
screen and access the setup screen shown
below.
Asetupofthe
temperatureonwhich
thealarmoperates.
Initialvalue:↑ 115℃↓ -10℃
Adjustmentrange-10℃ ~115℃
( ↑ Limit≧↓ Limit)
ŏReturn to
Linkage menu
●Temperature
●Angle