Garmin GPSMAP 396 - Display Options (Twilight, Timeout, XM Audio, Highway, Compass)

106 GPSMAP 396 Owner’s Manual
MAIn Menu > AlArMs tAb
Navigation (Nav) Alarms Sub Tab
Next Turn—sets an alarm to indicate next turn in route. Select Off
for no Next Turn alarm. Select Dist to enter a specic distance. For
example, if you enter 1 nm, the Next Turn alarm sounds one nautical
mile before you reach the next turn. Select Time to enter a specic
time before the turn for the alarm to go off. For example, if you
enter 00:02:00, the Next Turn alarm sounds two minutes before you
reach the next turn. Select Auto for the unit to provide a Next Turn
alarm at its discretion.
Arrival
—sets an alarm to sound when you are a specied distance
or time away from a destination waypoint. Select Off for no Arrival
alarm. Select Dist to enter a specic distance. Select Time to enter
a specic time before the destination for the alarm to go off. Select
Auto for the unit to provide an Arrival alarm at its discretion.
Off Course
—sets an alarm to sound when off your course. Select
On, then enter a distance.
Anchor Drag
—sets an alarm to sound when you have exceeded a
specied drift distance. Select On, and then enter a distance.
System Alarms Sub Tab
System Alarms Sub Tab
Clock—sets an alarm based on the unit’s clock. Select On, and then
enter a specic time that you want the alarm to sound. The unit must
be on for the clock alarm to work.
Ext. (External) Voltage—sets an alarm to sound when the external
voltage drops below a specied amount. Select On, and then enter a
specic voltage.
DGPS
—sets an alarm to sound when the unit loses a differential x.
Accuracy
—sets an alarm to sound when GPS accuracy falls outside
of the user-set value. Select On, and then enter a specic distance.