Garmin Tread 2 - Joining a Group Ride; Rejoining a Recent Group Ride; Adding Riders to a Radio Group Ride; Broadcasting a Message

Joining a Group Ride
You can join a group ride that was created by another rider.
1 From the main menu, select Group Ride > Join a Group Ride.
2 Enter the Ride ID, and select Done.
• To join a radio group ride, select the group ride by the name.
• To join a mobile group ride, select Join with Ride ID and enter the ride ID.
Rejoining a Recent Group Ride
You can rejoin any of your ten most-recent group rides.
1 From the main menu, select Group Ride > Recent Group Rides.
2 Select a recent group ride, and select Join.
Adding Riders to a Radio Group Ride
You can add riders to a radio group ride that is already in progress.
1 From the main menu, select Group Ride.
2 If necessary, select .
3 Select Add.
As new riders join the group ride, they appear on the list.
4 Select Continue.
Broadcasting a Message
WARNING
Do not read, send, or reply to any messages while driving, because doing so can cause a distraction that could
lead to an accident resulting in serious personal injury or death.
You can broadcast a preset message to the members in your active group ride that are in range of the VHF
radio.
1 From the main menu, select Group Ride.
2 If necessary, select .
3 Select Broadcast to Group.
4 Select a preset message, and select Send.
Broadcasting a Location
WARNING
While driving, do not interact with the display to broadcast your location, because doing so can cause a
distraction that could lead to an accident resulting in serious personal injury or death.
You can broadcast a location to the members in your active group ride that are in range of the VHF radio.
1 From the main menu, select Group Ride.
2 If necessary, select .
3 Select Broadcast to Group > Broadcast a Location, and select a location.
4 Select Share.
10 Off-Road Navigation Features