Disabling Phone Connectivity Features
You can disable specific phone connectivity features while keeping other features enabled.
1 Select > Phone.
2 Select the phone.
3 Select an option:
• To disable receiving calls on your connected headset, clear the Phone calls check box.
NOTE: The Phone calls check box is shown only if there is a headset connected.
• To disable playing sounds from the phone, such as music, on your Tread 2 or a connected headset, clear
the Media Audio check box.
Disabling Headset Features
By default, all compatible Bluetooth features are enabled when you pair your headset. You can disable certain
features while keeping others enabled.
1 Select > Headset.
2 Select the headset.
3 Select an option:
• To disable audio from phone calls, clear the Headset check box.
• To disable audio from streaming media, clear the Media Audio check box.
Disconnecting a Bluetooth Device
You can temporarily disconnect a Bluetooth device without deleting it from the paired devices list. The
Bluetooth device can connect to your Tread device automatically in the future.
1 Select an option:.
• To disconnect a phone, select > Phone.
• To disconnect a headset, select > Headset.
2 Select the device to disconnect.
3 Select Disconnect.
Deleting a Bluetooth Device
You can delete a paired phone or headset to prevent it from automatically connecting to your device in the
future.
1 Select an option:.
• To delete a phone, select > Phone.
• To delete a headset, select > Headset.
2 Select the device to delete.
3 Select Forget Device.
Live Services, Traffic, and Smartphone Features 51
To Next Page
Loading...
