Garmin Tread 2 - Music Player; Adding the Music Player Tool to the Map; Changing the Media Source; Garmin Powerswitch App

4 If necessary, reposition the vehicle with the other side closely aligned to a curb, driveway, or parking stall
lines, and repeat the alignment process.
You should attempt to keep the guidance lines symmetrical, even if your vehicle is not in perfect alignment
with the curb, driveway, or parking stall lines.
5 Select after alignment is complete.
Music Player
The music player can play music or audio from these sources.
• Music files stored on your Tread device.
• Bluetooth audio from a paired phone.
Adding the Music Player Tool to the Map
The music player map tool enables you to control the music player from your map.
1 Open the map.
2 Select > Music Player.
The music player controls appear on the map.
Changing the Media Source
You can change the source from which media is played on your device.
1 Select > Music Player.
2 Select Source.
3 Select an available media source from the list.
Garmin PowerSwitch
™
App
40 Using the Apps