Hands-Free Calling
NOTE: While most phones and headsets are supported and can be used, a particular phone or headset cannot
be guaranteed to be compatible. All features may not be available for your phone.
Using Bluetooth wireless technology, your device can connect to your compatible mobile phone and wireless
headset or helmet to become a hands-free device. To check compatibility, go to www.garmin.com/bluetooth.
Placing a Call
1 Select > Phone.
2 Select an option:
• To dial a number, select Dial, enter the phone number, and select Dial.
• To view numbers of recent, missed, or recently dialed or received calls, select Call History, select a log,
select a number, and select Call to dial it.
• To call a contact from your phone book, select Phone Book, select a contact, and select Call.
• To call a point of interest location such as a restaurant or attraction, select Browse Categories, select a
category, select a location, and select Call.
Placing a Call Using Voice Dial
Before you can use voice dialing, the voice assistant app on your phone must be available.
1 Select > Phone > Voice Dial.
2 Listen for the voice prompt.
3 Say Call, and say the contact name, phone number, or location you want to call.
Calling Home
Select > Phone > Call Home.
When using this feature for the first time, you are prompted to dial the home phone number.
TIP: You can reset the home phone number by selecting > Set Home Number.
Using In-Call Options
In-call options are available when you answer a call. Some options may not be compatible with your phone.
TIP: If you close the in-call options page, you can open it again by selecting from any screen. You can also
select the caller from the map.
• To set up a conference call, select Add Call.
• To transfer audio to your phone, select Call in Progress on Navigator.
TIP: You can use this feature if you want to disconnect the Bluetooth connection and remain on the call, or if
you need privacy.
• To use the dial pad, select Keypad.
TIP: You can use this feature to use automated systems, such as voice mail.
• To mute the microphone, select Mute.
• To hang up, select End Call.
Showing or Hiding App Notifications
You can use the Tread app to customize which types of smartphone notifications appear on your Tread 2
device.
1 On your phone, open the Tread app.
2 Select > > Smart Notifications.
A list of smartphone app categories appears.
3 Select a category to enable or disable notifications for that type of app.
50 Live Services, Traffic, and Smartphone Features
To Next Page
Loading...
