Transmitting Your Voice
Before you can transmit your voice, you must pair your Tread 2 device with a compatible Bluetooth headset or
connect the fist microphone.
You can transmit your voice over the radio using the connected fist microphone or a compatible Bluetooth
headset.
Select an option:
• Hold the push-to-talk button on the side of the connected fist microphone.
• From the main menu, select > Radio > Push to Talk.
• Use the voice dial feature on your connected Bluetooth headset (Enabling Push-to-Talk with a Headset,
page12).
TIP: You can press the pause or stop button to manually close the radio.
NOTE: You must enable the Push to Talk with Headset setting to use this feature (Radio Settings,
page13).
Adjusting the Radio Volume
1 Select > Radio > .
2 Use the slider bars to adjust the volume.
Radio Settings
From the main menu, select > Radio > .
Push to Talk with Headset: Enables you to transmit your voice using the push-to-talk button on your compatible
headset.
Roger Tone: Sets the roger tone the device plays when you operate your radio.
Reset Default Settings: Resets all radio settings and presets to factory default values.
inReach
®
Remote
The inReach remote function allows you to control your inReach satellite communication device (sold
separately) using your Tread 2 device. You can send messages, view weather reports, trigger an SOS alert,
and more. Go to buy.garmin.com to purchase an inReach device.
Connecting an inReach Device
1 Bring the inReach device within 3m(10ft.) of your Tread 2 device.
2 On your Tread 2 device, select > inReach.
3 Follow the on-screen instructions on your Tread 2 device to complete the pairing process.
After the pairing process is complete, the inReach and Tread 2 devices connect automatically when they are
within range.
Sending a Text Message
1 Select inReach > Compose.
2 Select one or more contacts, and select Done.
3 Enter a message.
4 Select Send.
Off-Road Navigation Features 13
To Next Page
Loading...
