Garmin Tread 2 - Settings; Phone and Headset Settings; Phone Settings; Headset Settings

Settings
Phone and Headset Settings
Phone Settings
Select > Phone, and select your phone.
Disconnect: Disconnects the paired phone.
Phone Name: Displays the name of the paired phone. You can select the name to change how it displays on
your navigation device.
Media Audio: Enables the navigation device to play media audio from your paired phone.
Garmin Tread: Appears when the navigation device is connected to the Tread app on your phone.
Forget Device: Removes the connected device from the list of paired devices. This option is available only after
a device is paired.
Headset Settings
Select > Headset, and select your headset.
Disconnect: Disconnects the paired headset.
Headset Name: Displays the name of the paired headset. You can select the name to change how it appears on
your navigation device.
Navigation Audio Quality: Sets the audio quality for navigation prompts.
Headset: Enables or disables headset features.
Media Audio: Enables or disables media audio through the headset.
Forget Device: Removes the headset from the list of paired devices.
Wi‑Fi Settings
The wireless network settings allow you to manage Wi‑Fi networks.
Select > Wi-Fi.
Wi-Fi: Enables the Wi‑Fi radio.
Saved Networks: Allows you to edit or remove saved networks.
Search for Networks: Searches for nearby Wi‑Fi networks (Connecting to a Wi‑Fi Network, page59).
Map Settings
Select > Map.
Map Vehicle Icon: Sets the vehicle icon that represents your position on the map.
Driving Map View: Sets the perspective on the map.
Map Detail: Sets the level of detail on the map. More detail may cause the map to draw slower.
Adventure Roads & Trails: Selects what types of adventure roads and trails are highlighted on the map.
Waypoint Labels: Sets the size of waypoint labels on the map.
Waypoint Decluttering: Hides waypoint icons at high map zoom levels.
Range Rings: Shows rings on the map, representing distance from you. The distance to the innermost ring is
shown on the bottom left corner of the screen.
NOTE: Range rings are shown only while using the Track Up or North Up map perspective (Changing the Map
Perspective, page29).
Auto Zoom: Automatically selects the zoom level for optimal use of your map. When disabled, you must zoom
in or out manually.
Skip Next Stop Confirmation: Sets a confirmation message to appear when skipping a location on your route.
Map Manager: Manages maps installed on the device (Changing the Map Region, page29).
52 Settings