Garmin Tread 2 - Adding a Shortcut; Removing a Shortcut; Saving Locations; Saving a Location

Adding a Shortcut
You can add shortcuts to the Where To? menu. A shortcut can point to a location, a category, or a search tool.
The Where To? menu can contain up to 36 shortcut icons.
1 Select Search > Add Shortcut.
2 Select an item.
Removing a Shortcut
1 Select Search > > Remove Shortcut(s).
2 Select a shortcut to remove.
3 Select the shortcut again to confirm.
4 Select Done.
Saving Locations
Saving a Location
1 Search for a location (Finding and Saving Locations, page29).
2 Select a location from the list of search results.
3 Select > Save.
4 If necessary, select Name to edit the name of the location.
5 Select Save.
Saving Your Current Location
1 From the map, select the vehicle icon.
2 Select Save.
3 If necessary, select Name to edit the name of the location.
4 Select Save.
Editing a Saved Location
1 Select Search > Waypoints.
2 If necessary, select a category.
3 Select a location.
4 Select Edit.
5 Select an option:
• Select Name.
• Select Map Symbol to change the symbol used to mark the saved location on a map.
• Select Collections to add or remove the location from your saved collection categories.
• Select Coordinates to edit the GPS coordinates for the location.
6 Edit the information.
7 Select Done.
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
1 Select Search > Waypoints.
2 Select a waypoint.
3 Select Edit > Delete > Yes.
36 Finding and Saving Locations