Garmin Tread 2 - Creating a Round-Trip Route; Navigating to a Saved Route

Creating a Round-Trip Route
The device can create a round-trip route using a specified starting location and a distance, duration, or
destination.
1 From the main menu, select > Round Trip.
2 Select Start Location.
3 Search for a location or select a location, and select Select.
4 Select Trip Attributes.
5 Select an option:
• Select Choose a Distance to plan your route by distance.
• Select Choose a Duration to plan your route based on time.
• Select Choose a Destination to plan your route to a specified location and back to the starting location.
6 Select Next.
7 Enter a distance, duration, or destination.
8 For routes based on distance or duration, select Add a Direction.
The route takes you in the selected direction and back.
9 Select Road Type to choose what type of road you prefer to ride on.
10 Select Calculate.
11 If necessary, adjust the slider to increase or decrease the adventurous routing level for your route
(Adventurous Routing, page7).
12 Select a route, and select Go!.
Navigating to a Saved Route
1 Select > Route Planner.
2 Select a saved route.
3 Select Go!.
4 Select the first location to navigate to, and select OK.
5 Select Start.
The device calculates a route from your current location to the selected location, and then it guides you to
the remaining route destinations in order.
Routes 17