Garmin Tread 2 - Viewing a Group Ride Notification; Exiting a Group Ride; Group Ride Settings; Radio

Viewing a Group Ride Notification
WARNING
Do not read or reply to any notifications while driving, because doing so can cause a distraction that could lead
to an accident resulting in serious personal injury or death.
For most pages, a notification appears when the device receives a broadcasted group ride location or message.
You can also view group ride notifications in the Group Ride app.
NOTE: When you are viewing the map, new notifications appear in a map tool at the edge of the screen.
1 From the main menu, select Group Ride > , and select a notification.
2 Select Go! to navigate to a shared location.
Exiting a Group Ride
1 From the main menu, select Group Ride.
2 If necessary, select .
3 Select Exit > Yes.
Group Ride Settings
From the main menu, select Group Ride > .
Edit Rider Name: Allows you to set your name that displays during a group ride. This setting is not available
during an active group ride.
Rider Map Labels: Sets the label displayed for each active rider on the map.
Show Tracks on Map: Shows the track that each group ride member takes on the map.
Reset Default Settings: Allows you to reset all group ride settings to default values. This setting is not available
during an active group ride.
Radio
NOTE: Before you can use the Radio app, you must install a Group Ride accessory. Go to garmin.com to
purchase a Group Ride accessory.
TIP: The Radio app is not available in all regions.
You can use the Radio app to create radio presets, select a radio channel, and select squelch codes. To use this
feature, you must connect the device and the antenna to the Group Ride mount. The Tread 2 device configures
radio settings automatically when you join or create a group ride.
Selecting a Preset
1 From the main menu, select > Radio.
2 Select an option:
• To move through the available presets, select or .
• To select a preset from the menu, select Preset.
Selecting a Radio Channel
1 From the main menu, select > Radio.
2 Select an option:
• To move to a different channel, select or .
• To select a MURS channel from the menu, select Channel.
Off-Road Navigation Features 11