Garmin Tread 2 - Arriving at Your Destination; Parking Near Your Destination; Tracks; Recording Tracks

Arriving at Your Destination
When you approach your destination, the device provides information to help you complete your route.
• indicates the location of your destination on the map, and a voice prompt announces you are approaching
your destination.
• When you approach some destinations while using an RV vehicle profile, the device automatically prompts
you to plan your arrival at an RV destination, such as a parking area. You can select a suggested point on the
map, and select Go! to navigate to that destination.
• When you stop at your destination, the device automatically ends the route. If the device does not detect your
arrival automatically, you can select > Stop to end your route.
Parking Near Your Destination
Your device can help you find a parking spot near your destination. When you approach some destinations, the
device automatically suggests parking areas.
1 Select an option:
• When the device suggests parking, select More to see all of the suggested parking areas.
NOTE: When you select a suggested parking area, the device automatically updates your route.
• If the device does not suggest parking locations, select Search > Categories > Parking, and select Near
Destination for the search area.
2 Select a parking location, and select Go!.
The device guides you to the parking area.
Tracks
Recording Tracks
Tracking records your path. When you start tracking, your device logs your location and updates the track line.
1 Select > Track Recorder.
2 Select Start.
If your device is paired with the Tread app, recorded tracks are periodically synchronized to your Garmin
account.
You can retrace your recorded track by navigating it as a new route (Converting a Track to a Route, page23).
Following Your Most Recent Track
You can quickly retrace your most recent track back to its beginning.
1 Select > TracBack.
Your most recent track appears on the map.
2 Select Go!.
Converting a Track to a Route
1 From the Saved app, open the track you want to convert (Viewing Your Saved Items, page37).
2 Select .
3 Select Convert to Route or Save as Route.
4 Select an option:
• SelectStart to Finish to save the route in the same direction as the track.
• Select Finish to Start to save the route in the reverse direction of the track.
Tracks 23