GCC Technologies AFR-24S - CorelDRAW AAS II Plug-In

RX II Series User Manual
CorelDRAW Plug-In A-4
CorelDRAW Plug-In Instruction
AASII VBA Installer is applicable for CorelDRAW Version 13, 14, 15, 16, 17, 18
Installation
Please refer to Step 8 in Chapter 2.7.1.2 Driver Installation to install AAS plug-in for
CorelDRAW.
Run CorelDRAW AAS Plug-in
Step 1 Run CorelDRAW to edit your graphics and select all images at once when you wish to
plot.
Step 2 Select “ToolsMacrosRun Macro.” Then select Global Macros
(GCCAASII_Draw13.gms) under the “Macros in” manual, and press “Run”.