GCC Technologies AFR-24S - Appearance of RX

AFR-24S User Manual
14
1.3.3 Appearance of RX II
Grid Drums – move
the media back and
forth during operation.
Control panel – consists of
14 control keys and 1 LED and
1 LCM showing messages and
menus.
Tool Carriage – performs the
cutting with the installed blade
and pen with AAS module.
Cutting Pad – provides the
protection of blade when the
blade is cutting.
Alignment Rulers –
media can be aligned
with the clear guide line
marks.
Platen – provides the
surface for holding and
supporting media while
performing cutting.
Pinch Rollers –
Hold the media during
cutting.
Lever –
Raise or lower the
pinch rollers.
Slicer Groove – slice
off the extra media
easily along this groove.