AFR-24S User Manual
4.6.3 RX II-Creasing Print Driver setting > Paper Page
Paper Size (Paper Page) [DEFAULT SETTING: Y = the width of machine; X will be
automatically set to be twice the length of Y]
The paper size represents your total work area. The X value represents the length and the
Y value represents the width. The paper size should be set as the same as your image so
you can get a better cutting quality.
Unit (Paper Page) [DEFAULT SETTING: Metric (mm)]
Here you can set your preferred measurement standard in which you would like use with the
RX II series print driver. You can choose between metric or imperial standards.
To Next Page
Loading...
