AFR-24S User Manual
Safety Measures
Before you start installation, please read below information carefully to avoid potentially
hazardous situations.
General safety
Use the voltage of the power source is identical to the voltage of the machine to prevent
any damage or failure.
Make sure that the plug is fully inserted in the power outlet. Do not use outlet that is
loose.
Do not touch the machine during a lightning storm.
Do not overload the power cord.
Do not place heavy objects on, or damage the power cord or plug.
Do not forcibly bend or pull the power cord.
Do not allow the machine / AC adapter / power plug to get wet, for example, by handling
them with wet hands or spilling beverages onto them.
Disconnect the AC adapter and stop using the device if you notice abnormal odor, heat,
discoloration, deformation or anything unusual while using it.
Operating precaution
Avoid environments where the machine is exposed to high levels of dust, temperature
(temperature exceeding 30°C or 85°F) or humidity (humidity exceeding 75% or where
the ambient temperature is near the dew point).
Keep the working area stable and avoid sever vibration.
Do not use or store the product is exposed to direct sunlight, water or oil splashes, salty
air or saltwater, dust or humidity, flammable gas and strong air current.
Select a location that is large enough to accommodate the machine.
Do not touch the paper sheets and moving parts of this machine during operation. Also
be careful to make sure that clothing and hair do not get caught.
Do not apply force or object weights on the moving arm.
Be sure to grasp the plug, not the cable, when disconnecting the power supply from an
electric form an electric socket.
To Next Page
Loading...
