Disable fine tuning flowmeter
failed message
When the flow measuring algorithm fails to make a fine tuning of the flow measurement,
a Fine_tuning_flowmeter_failed message is displayed. This is mainly a warning that
the accuracy of the flow measurement is slightly decreased.
ActionStep
Click Settings on the System menu. Click Alarms&Mon and scroll down to
Fine_Tune_Fail_Report.
1
•
If you click Enable and after that Execute the Fine_tuning_flowme-
ter_failed warning will be displayed if the system fails to perform a fine
tuning.
•
If you click Disable and after that Execute the Fine_tuning_flowme-
ter_failed warning will not be displayed on the screen and there will be
no entry in the logbook.
ÄKTA ready Operating Instructions 28960345 AD 149
10 Creating a method
10.1 The Method Editor
10.1.3 Other Method Editor features
To Next Page
Loading...
