System Setup
3-56 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
Customizing the Invenia ABUS 2.0
To access system customization, tap the configuration (gear)
icon in the lower, right-hand corner of the screen. Then
select the desired Configuration Menu by touching one of the
following buttons on the left-side of the menu:
• General
• Scanning Protocols
• Worklist
• Storage
• System
• Service (only displays when Service logs in with the Service
Login and Password)
• Post-Processing
• About
Figure 3-17. General Menu